Sand Washer

Product Details:

CONVOTECH ENGINEERING LLP Offer aggregate washing plant to integrate heavy attrition with sizing, lightweight contaminants removal and hydrocyclone based fines recovery in a single highly portable chassis. AggWash is a rapid-install solution for a wide range of applications within the aggregates, recycling, remediation and mining sectors.


 Key Features & Benefits  
• Produces up to 4 grades of aggregate and 1 or 2 grades of sand
• Modular design, pre-plumbed with single connection point for quick set-up
• All electric plant, pre-wired complete with simple plc control panel
• Log washer angle adjustment allows increased material retention and removal of trash
• Overband magnet on feed conveyor for removal of ferrous metals
• Rubber lined pumps, cyclones and transfer points for extended plant life

Additional Information:

• Item Code: CTEAWP
• Production Capacity: 2/ Month
• Delivery Time: 4 WEEKS
• Packaging Details: As per Standard

Product Details:

The types of equipment that are used to accomplish this are called CLASSIFIERS. There are three basic kinds used. The first two, the RAKE classifier and the SPIRAL or screw classifier work on the same principal, and are not often used any more. These two types were popular for many years. It wasn’t until the development of the CYCLONE type classifier that their popularity faded. You may still find a few though, in the older mills and the mills that require a classification of the larger ore sizes that the cyclones are not very good at sizing.

Additional Information:

• Item Code: CTES
• Production Capacity: 3/ MONTH
• Delivery Time: 2 WEEKS
• Packaging Details: AS PER STANDARD

Product Details:

Convotech Engineering Present Spiral Sand Washer effectively removes sand, silt and dirt from lakes, mines, nearby coastal areas and effectively removes sand or silt anywhere. The spiral sand washer quickly cleans the lake areas and shores of mud as well as open water.

Additional Information:

• Item Code: CTESSWM
• Production Capacity: 3/month
• Delivery Time: 3 Weeks
• Packaging Details: As per Standard

Product Details:

CONVOTECH ENGINEERING LLP offer spiral sand washing machine clean sand is mainly through the screw of equipment. Then the soil of sand is blended with water, the dirty water discharge from the drainage port. The sand screened under the effect of the screw, and discharge from the top outlet. The sand washing process is completed. According to the quantity of spiral, there is a single spiral sand washing machine and double.

Additional Information:

• Item Code: CTESSW
• Production Capacity: 30 to 50 TPH
• Delivery Time: 3 Weeks
• Packaging Details: As per Standard

Product Details:

With sincere intentions to preserve and uplift our reputation in the market, we are engrossed in providing a comprehensive assortment of Automatic Mobile Sand Washing Plant . Our offered sand washing plant is precisely assembled under the management of our skilled pool of professionals with the utilization of the best grade components and cutting edge technology. Additionally, our quality analyst rigorously checked this sand washing plant on different parameters to make sure its efficiency.

Features:

• Low Maintenance
• Flawless Performance
• Hassle Free Functionality

Request
Callback

Additional Information:

• Item Code: CTEMSWP
• Production Capacity: 2/MONTH
• Delivery Time: 3 WEEKS
• Packaging Details: AS PER STANDARD

Product Details:

CONVOTECH ENGINEERING LLP Sand Screw Washer utilize separation with water as the medium to clean and classify sand particles by weight. Larger particles weigh more, sink and are collected in the bottom of the trough

Additional Information:

• Item Code: CTESW
• Production Capacity: 20 TO 100 TPH
• Delivery Time: 3 Weeks
• Packaging Details: As Per Standard

Product Details:

With sincere intentions to preserve and uplift our reputation in the market, we are engrossed in providing a comprehensive assortment of  Sand Washing Equipment. Our offered sand washing plant is precisely assembled under the management of our skilled pool of professionals with the utilization of the best grade components and cutting edge technology. Additionally, our quality analyst rigorously checked this sand washing plant on different parameters to make sure its efficiency.

Features:

• Low maintenance
• Flawless performance
• Hassle free functionality

Additional Information:

• Item Code: CTESWE
• Production Capacity: 3/month
• Delivery Time: 3 WEEKS
• Packaging Details: AS PER STANDARD

Product Details:

Spiral sand washers are also called sand screw washers, especially used for the production of quality sand for construction, highway, railway, glass making, water and electricity industries and more.

Convotech Engineering is made simple, efficient and cost-effective using spiral sand washers.

Additional Information:

• Item Code: CTERSWM
• Production Capacity: 4/MONTH
• Delivery Time: 3 WEEKS
• Packaging Details: AS PER STANDARD

Product Details:

CONVOTECH ENGINEERING LLP offer aggregates washer are simply aggregate material that has undergone the wash process to remove dirt, or any other matter by applying a heavy force of water. More simply put, this is the process of washing clay, dirt and debris off of the rock once the aggregate has been mined.

Additional Information:

• Item Code: CTEASW
• Production Capacity: 2/ month
• Delivery Time: 3 WEEKS
• Packaging Details: As per Standard

Product Details:

Sand Washing comes in many forms and covers a range of feed and products produced, including construction aggregates such as concrete, asphalt, mason, mortar, and plaster sands; sports sands such as for golf courses, ball parks, and race courses; industrial sands, such as glass, filter, foundry, and frac; specialty sands and materials such as anti-skid, roofing granules; deligniting/organics removal; and soils washing for environmental projects

Additional Information:

• Item Code: CTESWP
• Production Capacity: 3/ month
• Delivery Time: 3 Weeks
• Packaging Details: As Per Standard

Product Details:

CONVOTECH ENGINEERING LLP Hydro Cyclone sand Washing plants are designed for removal of silt material/ultra fines (-) 150 microns from sand through washing and classifying sand.

Additional Information:

• Item Code: CTERSWP
• Production Capacity: 30 to 150 TPH
• Delivery Time: 3 Weeks
• Packaging Details: As per Standard

Product Details:

With sincere intentions to preserve and uplift our reputation in the market, we are engrossed in providing a comprehensive assortment of Automatic Sand Washing Plant. Our offered sand washing plant is precisely assembled under the management of our skilled pool of professionals with the utilization of the best grade components and cutting edge technology. Additionally, our quality analyst rigorously checked this sand washing plant on different parameters to make sure its efficiency.

Features:

• Low maintenance
• Flawless performance
• Hassle free functionality

Additional Information:

• Item Code: CTESC
• Production Capacity: 3 NOS /MONTH
• Delivery Time: 2 WEEK
• Packaging Details: AS PER STANDARD

Product Details:

CONVOTECH ENGINEERING LLP , is the first company in GUJARAT to customize and manufactures successfully 30 TPH BUCKET WHEEL SAND CLASSIFIER ...PROUDLY...
Bucket Wheel Sand Washing Machine with High Output, Low-cost Preperation, Durable Performance. Available in 30 TPH,50 TPH 8 TPH and 100 to 120 TPH.CONVOTECH ENGINEERING LLP can customize Bucket Wheel Classifier to the required capacity ...EVEN for 30 TPH Widely Used in Gravel, Mine, Building Material, Chemical industry.

Additional Information:

• Item Code: CTEDSSW
• Production Capacity: 2/MONTH
• Delivery Time: 3 WEEKS
• Packaging Details: AS PER STANDARD

Product Details:

CONVOTECH ENGINEERING LLP are the leading supplier of Industrial Bucket Wheel Classifier Sand Washing Plant in the industry.

Additional Information:

• Item Code: CTEISW
• Production Capacity: 30 TO 150 TPH
• Delivery Time: 3 Weeks
• Packaging Details: As Per Standard

Product Details:

CONVOTECH ENGINEERING LLP  hydro cyclones classify coarse and fine materials by centrifugal force. Materials are fed by pressure, so more power is needed. However, it is of low cost, small covering space, high classifying ratio and large capacity.

It simultaneously processes sand washing, sludge high mesh classification and dewatering. Dewatering screen of high mesh classifier and the cyclone are organized on one unit.

Hydro cyclones are used to wash in industries such as sand, aggregates, coal, industrial minerals, hard rock mining and more. Hydro cyclones have become widely used in washing because they are relatively inexpensive, process high volumes, take up minimal floor space and have no moving parts.

Additional Information:

• Item Code: CTEISWP
• Production Capacity: 2/Month
• Delivery Time: 3 Weeks
• Packaging Details: As per standard

Product Details:

We supply automatic screening plant with conveyors system for Screening of River sand. Our Plant capacity of screening is 100 MT per Hrs i.e. 1000 MT
Offering you a complete choice of products which include screening plants, mobile screening plant, sand screening plant, dewatering sand screen, sand vibrating screen and linear sand vibrating screen.

Additional Information:

• Item Code: CTESP
• Production Capacity: 20 to 150 TPH
• Delivery Time: 3 WEEKS
• Packaging Details: AS PER STANDARD

Product Details:

Eco Wash provides consistent solutions for all material and mineral washing needs. It offers excellent reliability, ease of transport and fast onsite installation. It facilitates the accurate separation of silt and clay from the washed sand products.

Additional Information:

• Item Code: CTEWASH
• Production Capacity: 5
• Delivery Time: 20 DAYS
• Packaging Details: AS PER STANDRAD

Product Details:

These screens dewater material and sludge and produce bulk material which can be transported with standard means. They are also used to recover solid particles from liquids, muds or sludges. The robust screen frame is manufactured in either a welded or a bolted and glued design, depending on the application.

Additional Information:

• Production Capacity: 3 NOS / MONTH
• Delivery Time: 2 WEEKS
• Packaging Details: AS PER STANDRDS

Product Details:

he dry feed material 0-5mm from the crushing plant and water is added in to the fabricated tank equipped with slow moving screw where decantation takes place with low turbulence flow.

 

Water with (-) 150 microns will be carried away by the flowing water moves in the opposite side and collected in weir and discharged outside.

 

The washed /Classified cleaned sand, through rotation of the screw against the water stream flow The cleaned sand will be lifted by the rotating bucket wheel fall on the De watering screen.

 

The slotted perforations in the special screen deck allows to remove water from the washed sand and water goes back in to the washing process, The cleaned & dewatered sand falls on to belt conveyor and to stock

 

Available in 3 variants of capacities up to 200TPH.

Additional Information:

• Item Code: CTE-BWC
• Production Capacity: 2 NOS / MONTH
• Delivery Time: 3 WEEKS
• Packaging Details: AS PER STANDRAD

Product Details:

The types of equipment that are used to accomplish this are called CLASSIFIERS. There are three basic kinds used. The first two, the RAKE classifier and the SPIRAL or screw classifier work on the same principal, and are not often used any more. These two types were popular for many years. It wasn’t until the development of the CYCLONE type classifier that their popularity faded. You may still find a few though, in the older mills and the mills that require a classification of the larger ore sizes that the cyclones are not very good at sizing.

Additional Information:

• Item Code: CTE-SC
• Production Capacity: 3 NOS/ MONTHS
• Delivery Time: 2 WEEKS
• Packaging Details: AS PER STANDRAD

Product Details:

 Wheel Sand Washing Machine with High Output, Low-cost Pperation, Durable Performance. Widely Used in Gravel, Mine, Building Material, Transportation, Chemical industry.

Additional Information:

• Item Code: CTE-DWS
• Production Capacity: 2 NOS/ MONTHS
• Delivery Time: 3 WEEKS
• Packaging Details: AS PER STANDRAD

Product Details:

Wheel Bucket Sand Washing Machine. China Famous Manufacturer of Sand Washing Machine. Offer Optimized Reasonable Sand Washer Solution for Free

Additional Information:

• Item Code: CTE-SWS
• Production Capacity: 2 NOS/MONTH
• Delivery Time: 3 WEEKS
• Packaging Details: AS PER STATNDRAD

Product Details:

portable screening plants feature the triple shaft, oval stroke, horizontal screens which are well known for their performance and longevity. Our portable plants are designed to get the most out of these high performance screens and make it easy to transport the plants from site to site. These plants are designed for scalping and finish screening applications and with their unmatched blending capabilities, they can produce many different product specifications.

Additional Information:

• Item Code: CTE-PSP
• Production Capacity: 1 Nos / month
• Delivery Time: 4 WEEKS
• Packaging Details: As Per standard

Product Details:

The Mobile screening plants are used for screening almost all natural stone and in recycling. The classifying and scalping screens are available with two or three decks, with hydraulic or diesel-electric drives. The areas of application of the MOBILE SCREEN plants are multifaceted. A large number of suitable screen surfaces are available for achieving the different final grain sizes and for different feed material.

Additional Information:

• Production Capacity: 2 NOS / MONTHS
• Delivery Time: 3 WEEKS
• Packaging Details: As Per standard

Product Details:

To dewater material effectively, damp material is feed onto a steep, downward inclined screen surface at the feed end of the dewatering Screen to achieve rapid drainage. A pool of water begins to form in the valley as material builds up on the slightly upward inclined surface. Counter rotating motors create a linear motion, driving solids uphill, while liquid drains through the screen media. The uphill slope of the screen, along with a discharge weir, creates a deep bed that acts as a filter medium, allowing retention of material much finer than the screen openings.


Advantages and Features
1. Low noise, easy maintenance
2. Stable structure with strong exciting force
3. High screening efficiency and low noise pollution
4. Light weight, easy to disassemble and replace
5. Stable structure and strong exciting force

Additional Information:

• Item Code: CTEDS
• Production Capacity: 2 nos/month
• Delivery Time: 3 Weeks
• Packaging Details: AS per Standard

Product Details:

With sincere intentions to preserve and uplift our reputation in the market, we are engrossed in providing a comprehensive assortment of Sand Washing Screw Classifier & Automatic Sand Washing Plant. Our offered sand washing plant is precisely assembled under the management of our skilled pool of professionals with the utilization of the best grade components and cutting edge technology. Additionally, our quality analyst rigorously checked this sand washing plant on different parameters to make sure its efficiency.

Features:

• Low maintenance
• Flawless performance
• Hassle free functionality

Product Details:

Bucket Classifier is mainly used to remove impurities (such as dust). It can be divided into two types: XS type and XL type. Sand washing machine is widely used in sand quarries, mines, building materials, transportation, chemical industry, electric power, water power, concrete mixing stations. etc.The sand washing machine features simple structure, big gap between impeller transmission bearing system and water as well as raw materials, so that it protects the bearing from dipping into the water, sand and other pollutants.

Additional Information:

• Item Code: CTE-SWB
• Production Capacity: 2 NOS/ MONTHS
• Delivery Time: 3 WEEKS
• Packaging Details: As per Standards

Product Details:

These screens dewater material and sludge and produce bulk material which can be transported with standard means. They are also used to recover solid particles from liquids, muds or sludges. The robust screen frame is manufactured in either a welded or a bolted and glued design, depending on the application.

Additional Information:

• Item Code: CTE-DS
• Production Capacity: 3 NOS/MONTHS
• Delivery Time: 3 WEEKS
• Packaging Details: AS PER STANDRAD

Product Details:

With sincere intentions to preserve and uplift our reputation in the market, we are engrossed in providing a comprehensive assortment of Automatic Sand Washing Plant. Our offered sand washing plant is precisely assembled under the management of our skilled pool of professionals with the utilization of the best grade components and cutting edge technology. Additionally, our quality analyst rigorously checked this sand washing plant on different parameters to make sure its efficiency.

Features:

• Low maintenance
• Flawless performance
• Hassle free functionality

Product Details:

CTE Hydro Wash have been developed to classify materials into desired end products efficiently, reliably, and economically.

With state of the Art hydro-cyclones and most powerful slurry Pump, and many other high-performance features, each model is versatile, user-friendly and highly productive of Sand Washing Plant.

Each and every component has been field tested on a wide range of application processes. RD group has integrated these test results and customer feedbacks and developed the Washing Plants to provide more reliable solutions.

If your aggregate or mining business demands superior Quality, lowest wastage and full mobility, you will find a RD Hydro-Wash imminent for all your needs. The RD Hydro-Wash provides you with unlimited possibilities in smooth process adaptation and best silt removal practices in Sand Washing Plant.

Look further closer at our Washing range, and our expertise shall guide you to select the product that is best for you.

FEATURES

•  150µ content limited to 12% and 75µ below 3%-6% by weight.
•  Rich cement mortar up to 35 Mpa can be achieved.
•  Tested for High Performance Concrete (HPC) and Self-Compacting Concrete (SCC).
•  No oversize particles.

Additional Information:

• Item Code: CTE-SW
• Production Capacity: 1 NOS /MONTH
• Delivery Time: 4 WEEKS
• Packaging Details: As Per Standard

Product Details:

Bucket Classifier is mainly used to remove impurities (such as dust). It can be divided into two types: XS type and XL type. Sand washing machine is widely used in sand quarries, mines, building materials, transportation, chemical industry, electric power, water power, concrete mixing stations. etc.The sand washing machine features simple structure, big gap between impeller transmission bearing system and water as well as raw materials, so that it protects the bearing from dipping into the water, sand and other pollutants

Additional Information:

• Item Code: CTEWHC
• Production Capacity: 3/ MONTH
• Delivery Time: 3 WEEKS
• Packaging Details: AS PER STANDARD

Product Details:

CONVOTECH ENGINEERING offer The artificial sand produced by proper machines can be a better substitute to river sand. The sand should be sharp, clean and course. The grains should be of durable material. The grain sizes must be such that it should give minimum voids. The presence of clay and silt retards the setting of the cement and makes the mortar weaker and the walls or the slab leaks and holds dampness.
The sand in the mortar does not add any strength but it is used as an dulterant for economy and with the same it

Additional Information:

• Item Code: CTEMSMP
• Production Capacity: 2/month
• Delivery Time: 4 weeks
• Packaging Details: As Per Standard

Product Details:

Additional Information:

• Item Code: CT
• Production Capacity: 90 -100 % EFFICIENCY
• Delivery Time: 30 TO 45 DAYS WITH QUALITY CHECKS
• Packaging Details: WOODEN PALLETS